You are here: Home / Products / Hide / Alminum sheet / Thin Bendable Aluminum Sheet

Product Category

Share to:

Thin Bendable Aluminum Sheet

Thin Bendable Aluminum Sheet
Alloy Series:1000,3000,5000,6000,7000
Temper: O,H14,H24,H32,H112
Thickness: 5-100mm, tolerance: +/-0.02mm
Width: 1000-1500mm, tolerance:+/-1mm
Length: 2000-6000mm, tolerance:+/-1mm
Surface: Mill finish,Anodized"

Availability:

Quantity:



Inquire Add to Basket

Product Description
Product Attributes
Supply Ability
Application
Packing

Thin Bendable Aluminum Sheet is a rolled product with a rectangular cross section, a thickness of not less than 6.0mm (or 0.250 in), and a cut or sawn edge. It is produced in coils by a hot or cold rolling process and then cut to length. Aluminum thick plates can also be produced directly in straight lengths, depending on thickness.

Bendable Aluminum sheet Bendable Aluminum plate Sheet Thin Bendable Aluminum Sheet

Mechanical Property
Temper	Thickness	Tensile Strength（Mpa）	Strength(Mpa)	Elongation%	Cup Bulge
O	0.8-1.3	175-215	65	18	-
	1.31-2.9			19	-
	2.91-4.5			20	-
H12,H22，H32	0.2-0.3	215-265	-	3	-
	0.31-0.5		-	4	-
	0.51-0.8		-	5	-
	0.81-1.3		155	5	-
	1.31-2.9			7	-
	2.91-4.5			9	-
H14,H24,H34	0.2-0.5	235-285	-	3	-
	0.51-0.8		-	4	-
	0.81-1.3		175	4	-
	1.31-2.9			6	-
	2.91-4.5			7	-
H16,H26,H36	0.2-0.8	255-305	-	3	-
	0.81-4.0		205	4	-
H18	0.2-0.8	275	-	3	-
	0.81-3.0		225	4	-
H19	0.2-0.5	285	-	1	-

Mechanical Property
Temper	Thickness	Tensile Strength（Mpa）	Strength(Mpa)	Elongation%	Cup Bulge
O	0.8-1.3	175-215	65	18	-
	1.31-2.9			19	-
	2.91-4.5			20	-
H12,H22，H32	0.2-0.3	215-265	-	3	-
	0.31-0.5		-	4	-
	0.51-0.8		-	5	-
	0.81-1.3		155	5	-
	1.31-2.9			7	-
	2.91-4.5			9	-
H14,H24,H34	0.2-0.5	235-285	-	3	-
	0.51-0.8		-	4	-
	0.81-1.3		175	4	-
	1.31-2.9			6	-
	2.91-4.5			7	-
H16,H26,H36	0.2-0.8	255-305	-	3	-
	0.81-4.0		205	4	-
H18	0.2-0.8	275	-	3	-
	0.81-3.0		225	4	-
H19	0.2-0.5	285	-	1	-

Product Category

Thin Bendable Aluminum Sheet

WHAT WE PROVIDE

WHAT WE PROVIDE

ADDRESS

PHONE

WHAT WE PROVIDE