Availability: | |
---|---|
Quantity: | |
5a05 is an Al Mg series rust resistant alloy aluminum that cannot be heat treated for strengthening. This alloy has a higher magnesium content and lower strength, similar to 5A03 alloy. Cold deformation of alloys can increase strength, but decrease plasticity. The plasticity in the annealed state is relatively high, while the plasticity in the semi cold worked hardened state is still acceptable. The alloy has good corrosion resistance and weldability, and is suitable for spot welding, atomic hydrogen welding, gas welding and argon arc welding. Its machinability and annealing state are very poor, while the semi cold work hardening state is still acceptable.
5a05 is an Al Mg series rust resistant alloy aluminum that cannot be heat treated for strengthening. This alloy has a higher magnesium content and lower strength, similar to 5A03 alloy. Cold deformation of alloys can increase strength, but decrease plasticity. The plasticity in the annealed state is relatively high, while the plasticity in the semi cold worked hardened state is still acceptable. The alloy has good corrosion resistance and weldability, and is suitable for spot welding, atomic hydrogen welding, gas welding and argon arc welding. Its machinability and annealing state are very poor, while the semi cold work hardening state is still acceptable.
Product | Contract No. | Lot No. | ||||||||||
Dimension (mm) | 1.2-200 | Alloy | 5A05 | Piece Count | ||||||||
Techuique Standard | GB/T3190--1996/EN | Weight(kg) | ||||||||||
Chemical Composition(%) | ||||||||||||
Si | Fe | Cu | Mn | Mg | Cr | Ni | Zn | Ti | Others | Al | ||
Standard | 0.5 | 0.5~1.0 | 0.1 | 0.3-0.6 | 4.8-5.5 | - | - | 0.2 | 0.15 | 0.15 | Remain | |
Notice:Aluminum foil not contains Pb、As and other Virose elements | ||||||||||||
Mechanical Property | ||||||||||||
Temper | Thickness | Tensile Strength(Mpa) | Strength(Mpa) | Elongation% | Cup Bulge | |||||||
O | 1.2-6.3 | 290-365 | 130-205 | - | - | |||||||
6.31-80 | 285-360 | 125-205 | 14 | - | ||||||||
80.1-120 | 275 | 120 | 12 | - | ||||||||
120.1-160 | 270 | 115 | 12 | - | ||||||||
160.1-200 | 265 | 105 | 10 | - | ||||||||
H112 | 6.3-40 | 290 | 130 | 10 | - | |||||||
40.1-80.0 | 285 | 125 | 10 | - | ||||||||
H116 | 1.6-30 | 315 | 230 | 10 | - | |||||||
30.1-40 | 305 | 215 | 10 | - | ||||||||
40.1-80.0 | 285 | 200 | 10 | - | ||||||||
80.1-110 | 275 | 170 | 10 | - | ||||||||
H321 | 4.0-12.5 | 315-405 | 230-315 | - | - | |||||||
12.51-40.0 | 305-385 | 215-305 | 10 | - | ||||||||
40.1-80.0 | 385-385 | 200-295 | 10 | - | ||||||||
H323 | 1.2-6.3 | 330-400 | 250-315 | - | - | |||||||
H343 | 1.2-6.3 | 365-435 | 285-350 | - | - |
Product | Contract No. | Lot No. | ||||||||||
Dimension (mm) | 1.2-200 | Alloy | 5A05 | Piece Count | ||||||||
Techuique Standard | GB/T3190--1996/EN | Weight(kg) | ||||||||||
Chemical Composition(%) | ||||||||||||
Si | Fe | Cu | Mn | Mg | Cr | Ni | Zn | Ti | Others | Al | ||
Standard | 0.5 | 0.5~1.0 | 0.1 | 0.3-0.6 | 4.8-5.5 | - | - | 0.2 | 0.15 | 0.15 | Remain | |
Notice:Aluminum foil not contains Pb、As and other Virose elements | ||||||||||||
Mechanical Property | ||||||||||||
Temper | Thickness | Tensile Strength(Mpa) | Strength(Mpa) | Elongation% | Cup Bulge | |||||||
O | 1.2-6.3 | 290-365 | 130-205 | - | - | |||||||
6.31-80 | 285-360 | 125-205 | 14 | - | ||||||||
80.1-120 | 275 | 120 | 12 | - | ||||||||
120.1-160 | 270 | 115 | 12 | - | ||||||||
160.1-200 | 265 | 105 | 10 | - | ||||||||
H112 | 6.3-40 | 290 | 130 | 10 | - | |||||||
40.1-80.0 | 285 | 125 | 10 | - | ||||||||
H116 | 1.6-30 | 315 | 230 | 10 | - | |||||||
30.1-40 | 305 | 215 | 10 | - | ||||||||
40.1-80.0 | 285 | 200 | 10 | - | ||||||||
80.1-110 | 275 | 170 | 10 | - | ||||||||
H321 | 4.0-12.5 | 315-405 | 230-315 | - | - | |||||||
12.51-40.0 | 305-385 | 215-305 | 10 | - | ||||||||
40.1-80.0 | 385-385 | 200-295 | 10 | - | ||||||||
H323 | 1.2-6.3 | 330-400 | 250-315 | - | - | |||||||
H343 | 1.2-6.3 | 365-435 | 285-350 | - | - |
Productivity: 1200 tons per month Transportation: Ocean,Land
Place of Origin: China Supply Ability: 1050 tons per month
Certificate: ISO9001 HS Code: 76061199
Payment Type: L/C,T/T In co term: FOB,CFR,CIF,EXW
Productivity: 1200 tons per month Transportation: Ocean,Land
Place of Origin: China Supply Ability: 1050 tons per month
Certificate: ISO9001 HS Code: 76061199
Payment Type: L/C,T/T In co term: FOB,CFR,CIF,EXW
Commonly used in manufacturing welded pipelines, welded oil tanks, and other liquid containers that require high process shaping, good corrosion resistance, and medium load capacity, as well as other parts; Wire used as welding rods and rivets requires anodizing treatment. It is also used for making armor plates, high-strength structural components, storage tanks, pressure vessels, and marine product components
Commonly used in manufacturing welded pipelines, welded oil tanks, and other liquid containers that require high process shaping, good corrosion resistance, and medium load capacity, as well as other parts; Wire used as welding rods and rivets requires anodizing treatment. It is also used for making armor plates, high-strength structural components, storage tanks, pressure vessels, and marine product components
Packing: Strong seaworthy wooden pallet or customized
Loading Port: Shanghai,Ningbo,Xiamen,Qingdao
Packing: Strong seaworthy wooden pallet or customized
Loading Port: Shanghai,Ningbo,Xiamen,Qingdao