Availability: | |
---|---|
Quantity: | |
5a05 is an Al Mg series rust resistant alloy aluminum that cannot be heat treated for strengthening. This alloy has a higher magnesium content and lower strength, similar to 5A03 alloy. Cold deformation of alloys can increase strength, but decrease plasticity. The plasticity in the annealed state is relatively high, while the plasticity in the semi cold worked hardened state is still acceptable. The alloy has good corrosion resistance and weldability, and is suitable for spot welding, atomic hydrogen welding, gas welding and argon arc welding. Its machinability and annealing state are very poor, while the semi cold work hardening state is still acceptable.
5a05 is an Al Mg series rust resistant alloy aluminum that cannot be heat treated for strengthening. This alloy has a higher magnesium content and lower strength, similar to 5A03 alloy. Cold deformation of alloys can increase strength, but decrease plasticity. The plasticity in the annealed state is relatively high, while the plasticity in the semi cold worked hardened state is still acceptable. The alloy has good corrosion resistance and weldability, and is suitable for spot welding, atomic hydrogen welding, gas welding and argon arc welding. Its machinability and annealing state are very poor, while the semi cold work hardening state is still acceptable.
Product | Contract No. | Lot No. | ||||||||||
Dimension (mm) | 1.2-200 | Alloy | 5A05 | Piece Count | ||||||||
Techuique Standard | GB/T3190--1996/EN | Weight(kg) | ||||||||||
Chemical Composition(%) | ||||||||||||
Si | Fe | Cu | Mn | Mg | Cr | Ni | Zn | Ti | Others | Al | ||
Standard | 0.5 | 0.5~1.0 | 0.1 | 0.3-0.6 | 4.8-5.5 | - | - | 0.2 | 0.15 | 0.15 | Remain |
Product | Contract No. | Lot No. | ||||||||||
Dimension (mm) | 1.2-200 | Alloy | 5A05 | Piece Count | ||||||||
Techuique Standard | GB/T3190--1996/EN | Weight(kg) | ||||||||||
Chemical Composition(%) | ||||||||||||
Si | Fe | Cu | Mn | Mg | Cr | Ni | Zn | Ti | Others | Al | ||
Standard | 0.5 | 0.5~1.0 | 0.1 | 0.3-0.6 | 4.8-5.5 | - | - | 0.2 | 0.15 | 0.15 | Remain |
Productivity: 1500 tons per month Transportation: Ocean,Land
Place of Origin: China Supply Ability: 1050 tons per month
Certificate: ISO9001 HS Code: 76061199
Payment Type: L/C,T/T In co term: FOB,CFR,CIF,EXW
Productivity: 1500 tons per month Transportation: Ocean,Land
Place of Origin: China Supply Ability: 1050 tons per month
Certificate: ISO9001 HS Code: 76061199
Payment Type: L/C,T/T In co term: FOB,CFR,CIF,EXW
5A05 alloy is commonly used for manufacturing welded pipelines, welded oil tanks, and other liquid containers that require high process plasticity, good corrosion resistance, and medium load capacity, as well as other parts; Wire is used as welding rods and rivets, and rivets require anodizing treatment. In foreign countries, similar alloys (such as 5456) are used for making armor plates and high-strength structural components. Storage tanks, pressure vessels, and marine supplies components.
5A05 alloy is commonly used for manufacturing welded pipelines, welded oil tanks, and other liquid containers that require high process plasticity, good corrosion resistance, and medium load capacity, as well as other parts; Wire is used as welding rods and rivets, and rivets require anodizing treatment. In foreign countries, similar alloys (such as 5456) are used for making armor plates and high-strength structural components. Storage tanks, pressure vessels, and marine supplies components.
Packing: Strong seaworthy wooden pallet or customized
Loading Port: Shanghai,Ningbo,Xiamen,Qingdao
Packing: Strong seaworthy wooden pallet or customized
Loading Port: Shanghai,Ningbo,Xiamen,Qingdao