 |
loading
| Availability: | |
|---|---|
| Quantity: | |
Perforated Thin Aluminum Strip Al+Mg alloy series aluminum strip: Representative products 5052 and 5754 aluminum strip magnesium alloy content, high hardness, good bending performance. It is suitable for bending machining parts and hardware industry with clear requirements on hardness.
Perforated Thin Aluminum Strip Al+Mg alloy series aluminum strip: Representative products 5052 and 5754 aluminum strip magnesium alloy content, high hardness, good bending performance. It is suitable for bending machining parts and hardware industry with clear requirements on hardness.
The 5052 aluminum alloy nominally contains 2.5% magnesium, 0.25% chromium, and has good workability, moderate static strength, high fatigue strength, good weldability, and very good corrosion resistance, especially in the Marine atmosphere. It also has low density and excellent thermal conductivity similar to other aluminum alloys. Alloy 5052 can be hardened by cold working and cannot be heat treated to obtain higher strength. Magnesium is low enough not to suffer stress corrosion cracking, which can affect alloys containing more than 3.5% Mg.
| Product | Perforated Thin Aluminum Strip | Contract No. | Lot No. | |||||||||
| Dimension (mm) | 0.2-4.5 | Alloy | 5052 | Piece Count | ||||||||
| Techuique Standard | GB/T3190--1996/EN | Weight(kg) | ||||||||||
| Chemical Composition(%) | ||||||||||||
| Si | Fe | Cu | Mn | Mg | Cr | Ni | Zn | Ti | Others | Al | ||
| Standard | 0.25 | 0.4 | 0.1 | 0.1 | 2.2-2.8- | 0.15-0.35 | - | 0.1 | - | 0.15 | Remain | |
| Notice:Aluminum foil not contains Pb、As and other Virose elements | ||||||||||||
| Mechanical Property | ||||||||||||
| Temper | Thickness | Tensile Strength（Mpa） | Strength(Mpa) | Elongation% | Cup Bulge | |||||||
| O | 0.8-1.3 | 175-215 | 65 | 18 | - | |||||||
| 1.31-2.9 | 19 | - | ||||||||||
| 2.91-4.5 | 20 | - | ||||||||||
| H12,H22，H32 | 0.2-0.3 | 215-265 | - | 3 | - | |||||||
| 0.31-0.5 | - | 4 | - | |||||||||
| 0.51-0.8 | - | 5 | - | |||||||||
| 0.81-1.3 | 155 | 5 | - | |||||||||
| 1.31-2.9 | 7 | - | ||||||||||
| 2.91-4.5 | 9 | - | ||||||||||
| H14,H24,H34 | 0.2-0.5 | 235-285 | - | 3 | - | |||||||
| 0.51-0.8 | - | 4 | - | |||||||||
| 0.81-1.3 | 175 | 4 | - | |||||||||
| 1.31-2.9 | 6 | - | ||||||||||
| 2.91-4.5 | 7 | - | ||||||||||
| H16,H26,H36 | 0.2-0.8 | 255-305 | - | 3 | - | |||||||
| 0.81-4.0 | 205 | 4 | - | |||||||||
| H18 | 0.2-0.8 | 275 | - | 3 | - | |||||||
| 0.81-3.0 | 225 | 4 | - | |||||||||
| H19 | 0.2-0.5 | 285 | - | 1 | - | |||||||
The 5052 aluminum alloy nominally contains 2.5% magnesium, 0.25% chromium, and has good workability, moderate static strength, high fatigue strength, good weldability, and very good corrosion resistance, especially in the Marine atmosphere. It also has low density and excellent thermal conductivity similar to other aluminum alloys. Alloy 5052 can be hardened by cold working and cannot be heat treated to obtain higher strength. Magnesium is low enough not to suffer stress corrosion cracking, which can affect alloys containing more than 3.5% Mg.
| Product | Perforated Thin Aluminum Strip | Contract No. | Lot No. | |||||||||
| Dimension (mm) | 0.2-4.5 | Alloy | 5052 | Piece Count | ||||||||
| Techuique Standard | GB/T3190--1996/EN | Weight(kg) | ||||||||||
| Chemical Composition(%) | ||||||||||||
| Si | Fe | Cu | Mn | Mg | Cr | Ni | Zn | Ti | Others | Al | ||
| Standard | 0.25 | 0.4 | 0.1 | 0.1 | 2.2-2.8- | 0.15-0.35 | - | 0.1 | - | 0.15 | Remain | |
| Notice:Aluminum foil not contains Pb、As and other Virose elements | ||||||||||||
| Mechanical Property | ||||||||||||
| Temper | Thickness | Tensile Strength（Mpa） | Strength(Mpa) | Elongation% | Cup Bulge | |||||||
| O | 0.8-1.3 | 175-215 | 65 | 18 | - | |||||||
| 1.31-2.9 | 19 | - | ||||||||||
| 2.91-4.5 | 20 | - | ||||||||||
| H12,H22，H32 | 0.2-0.3 | 215-265 | - | 3 | - | |||||||
| 0.31-0.5 | - | 4 | - | |||||||||
| 0.51-0.8 | - | 5 | - | |||||||||
| 0.81-1.3 | 155 | 5 | - | |||||||||
| 1.31-2.9 | 7 | - | ||||||||||
| 2.91-4.5 | 9 | - | ||||||||||
| H14,H24,H34 | 0.2-0.5 | 235-285 | - | 3 | - | |||||||
| 0.51-0.8 | - | 4 | - | |||||||||
| 0.81-1.3 | 175 | 4 | - | |||||||||
| 1.31-2.9 | 6 | - | ||||||||||
| 2.91-4.5 | 7 | - | ||||||||||
| H16,H26,H36 | 0.2-0.8 | 255-305 | - | 3 | - | |||||||
| 0.81-4.0 | 205 | 4 | - | |||||||||
| H18 | 0.2-0.8 | 275 | - | 3 | - | |||||||
| 0.81-3.0 | 225 | 4 | - | |||||||||
| H19 | 0.2-0.5 | 285 | - | 1 | - | |||||||
Productivity: 1500 tons per month Transportation: Ocean,Land
Place of Origin: China Supply Ability: 1050 tons per month
Certificate: ISO9001 HS Code: 76061199
Payment Type: L/C,T/T In co term: FOB,CFR,CIF,EXW
Productivity: 1500 tons per month Transportation: Ocean,Land
Place of Origin: China Supply Ability: 1050 tons per month
Certificate: ISO9001 HS Code: 76061199
Payment Type: L/C,T/T In co term: FOB,CFR,CIF,EXW
Applications for the 5052 include Marine parts, aircraft, construction, general sheet metal products, heat exchangers, fuel lines and fuel tanks, floor panels, street lights, appliances, rivets and wires.
Applications for the 5052 include Marine parts, aircraft, construction, general sheet metal products, heat exchangers, fuel lines and fuel tanks, floor panels, street lights, appliances, rivets and wires.
Packing: Strong seaworthy wooden pallet or customized
Loading Port: Shanghai,Ningbo,Xiamen,Qingdao
Packing: Strong seaworthy wooden pallet or customized
Loading Port: Shanghai,Ningbo,Xiamen,Qingdao
