Marine Aluminum Sheet
Alloy Series:5083
Temper: O,H32,H112
Thickness: 5-100mm, tolerance: +/-0.02mm
Width: 1000-1500mm, tolerance:+/-1mm
Length: 2000-6000mm, tolerance:+/-1mm
Surface: Mill finish
Availability: | |
---|---|
Quantity: | |
Marine Aluminum Sheet Alloy 5083 is a rust-proof aluminum alloy of AL-MG series, which cannot be heat-treated. The magnesium content of this alloy is lower than that of 5A05 alloy, higher than that of 5A03 alloy, and its properties are between 5A05 and 5A03. The plasticity of the alloy is good, but the strength is low.Its corrosion resistance and weldability is good, annealing state cutting performance is very poor
Marine Aluminum Sheet Alloy 5083 is a rust-proof aluminum alloy of AL-MG series, which cannot be heat-treated. The magnesium content of this alloy is lower than that of 5A05 alloy, higher than that of 5A03 alloy, and its properties are between 5A05 and 5A03. The plasticity of the alloy is good, but the strength is low.Its corrosion resistance and weldability is good, annealing state cutting performance is very poor
Processing property:
1. Formability The alloy cold process plasticity is good
2. Welding performance The welding performance of the alloy is good in argon arc welding, followed by resistance welding and spot welding, and poor in gas welding. Not suitable for brazing
3. Machinability The machinability of the alloy is poor
Product | Contract No. | Lot No. | ||||||||||
Dimension (mm) | 0.5-150 | Alloy | 5083 | Piece Count | ||||||||
Techuique Standard | GB/T3190--1996/EN | Weight(kg) | ||||||||||
Chemical Composition(%) | ||||||||||||
Si | Fe | Cu | Mn | Mg | Cr | Ni | Zn | Ti | Others | Al | ||
Standard | 0.4 | 0.4 | 0.1 | 0.4-1.0 | 4.0-4.9 | 0.05-0.25 | - | 0.25 | 0.15 | 0.15 | Remain | |
Notice:Aluminum foil not contains Pb、As and other Virose elements | ||||||||||||
Mechanical Property | ||||||||||||
Temper | Thickness | Tensile Strength(Mpa) | Strength(Mpa) | Elongation% | Cup Bulge | |||||||
5D | 50mm | |||||||||||
O | 0.5-4.5 | 275-350 | 125-200 | - | 16 | - | ||||||
H-112 | 4.51-6.5 | 275 | 125 | - | 11 | - | ||||||
6.51-12.5 | 275 | 125 | - | 12 | - | |||||||
12.5-40.0 | 275 | 125 | 10 | - | ||||||||
40.1-50.0 | 270 | 115 | 10 | - | ||||||||
F | 50.1-150 | - | - | - | - |
Processing property:
1. Formability The alloy cold process plasticity is good
2. Welding performance The welding performance of the alloy is good in argon arc welding, followed by resistance welding and spot welding, and poor in gas welding. Not suitable for brazing
3. Machinability The machinability of the alloy is poor
Product | Contract No. | Lot No. | ||||||||||
Dimension (mm) | 0.5-150 | Alloy | 5083 | Piece Count | ||||||||
Techuique Standard | GB/T3190--1996/EN | Weight(kg) | ||||||||||
Chemical Composition(%) | ||||||||||||
Si | Fe | Cu | Mn | Mg | Cr | Ni | Zn | Ti | Others | Al | ||
Standard | 0.4 | 0.4 | 0.1 | 0.4-1.0 | 4.0-4.9 | 0.05-0.25 | - | 0.25 | 0.15 | 0.15 | Remain | |
Notice:Aluminum foil not contains Pb、As and other Virose elements | ||||||||||||
Mechanical Property | ||||||||||||
Temper | Thickness | Tensile Strength(Mpa) | Strength(Mpa) | Elongation% | Cup Bulge | |||||||
5D | 50mm | |||||||||||
O | 0.5-4.5 | 275-350 | 125-200 | - | 16 | - | ||||||
H-112 | 4.51-6.5 | 275 | 125 | - | 11 | - | ||||||
6.51-12.5 | 275 | 125 | - | 12 | - | |||||||
12.5-40.0 | 275 | 125 | 10 | - | ||||||||
40.1-50.0 | 270 | 115 | 10 | - | ||||||||
F | 50.1-150 | - | - | - | - |
Productivity: 1500 tons per month Transportation: Ocean,Land
Place of Origin: China Supply Ability: 1050 tons per month
Certificate: ISO9001 HS Code: 76061199
Payment Type: L/C,T/T In co term: FOB,CFR,CIF,EXW
Productivity: 1500 tons per month Transportation: Ocean,Land
Place of Origin: China Supply Ability: 1050 tons per month
Certificate: ISO9001 HS Code: 76061199
Payment Type: L/C,T/T In co term: FOB,CFR,CIF,EXW
Used to make parts that require moderate strength and good corrosion resistance, such as welded fireproof pressure vessels, parts for television towers, parts for Marine, automobile and aircraft vehicles, and armor plates
Used to make parts that require moderate strength and good corrosion resistance, such as welded fireproof pressure vessels, parts for television towers, parts for Marine, automobile and aircraft vehicles, and armor plates
Packing: Strong seaworthy wooden pallet or customized
Loading Port: Shanghai,Ningbo,Xiamen,Qingdao
Packing: Strong seaworthy wooden pallet or customized
Loading Port: Shanghai,Ningbo,Xiamen,Qingdao